Air conditioning
From a single split system to VRF multi-zone systems with dozens of indoor units. We design the refrigerant pipework, install, evacuate and start up.
We cover the discipline end to end
From the first calculation to the signed acceptance report. Every item below is work done by our own engineers and crews, not by outside subcontractors.
Cooling-load calculation
We calculate the load from glazing, orientation, occupancy and equipment — and size the capacity from the facts.
Air conditioning design
Pipework routing, unit placement, condensate drainage, power supply and coordination with ventilation and building controls.
VRF multi-zone systems
Systems with dozens of indoor units, individual room control and heat recovery.
Chiller and fan coil
For large buildings with high cooling loads: chillers, pump sets, fan coil units, hydraulics.
Pipework installation
Copper brazing under nitrogen, evacuation, pressure testing, insulation, condensate drains with a fall and condensate pumps.
Service
Seasonal maintenance, heat exchanger cleaning, pressure checks and top-up charging to schedule.
Where we do it
Facility types where we deliver “air conditioning” most often.
- Showrooms and dealerships
- Business centres and offices
- Medical centres
- Server and plant rooms
- Shopping centres
- Hotels and apartments
What it looks like on site
Five steps from the call to maintenance
The process is the same for every discipline — only the content of the project changes.
- EnquiryWe take in the task: facility type, floor area, timeline. We reply on WhatsApp.
- Site visitAn engineer visits the site, takes measurements and records the technical conditions.
- Design and estimateLoad calculations, schematics, equipment schedule and a transparent itemised estimate.
- InstallationOwn crews, own vehicle fleet, designer's supervision and commissioning with test reports.
- Warranty and maintenanceService centre, scheduled maintenance and emergency call-outs under contract.
Most common questions
Count the zones. Up to 3–4 rooms, separate split systems are usually cheaper. Beyond that VRF wins: one outdoor unit instead of ten on the façade, shared pipework, individual control and lower power consumption.
Other disciplines
Need a project for “air conditioning”?
Site visit, measurements and a technical brief. You receive an itemised estimate and a system layout.
Service desk: +7 777 005-31-01
